Advertisements
Tangguh LNG is BP's most substansial business in Indonesia. It involves the development of 6 gas fields in the Wiriagar, Berau and Muturi PSCs in Bintuni Bay, West Papua. Produced through offshore platforms, the gas will be brought ashore, processed into liquefied natural gas (LNG) and loaded for shipment to East Asian and North American markets. Proven reserves amount to 14.4 trillion cubic feet (tcf), sufficient to support long term LNG sales contract.Tangguh presents BP with a remarkable opportunity and a great challenge. The gas reserves beneath Bintuni Bay can provide a valuable source of energy, but to reach and extract this energy we will have to address a wide range of environmental and social issues, because the Bintuni Bay area is rich in biodiversity and is one of the lesser developed areas of Indonesia.
All over the world we look for people who share our ambition to be competitive, successful and a force for good.If you share these values with us, then our exploration and production business in Indonesia are calling for YOU. Applications are now open to join Tangguh LNG as:
Senior Turn Around (TAR) Scheduler
Requirements:
- Demonstrate leadership and commitment to develop good safety behaviours.
- Delivering optimized Turn Around preparation and execution as per the approved performance target .
- Creating and optimizing the integrated turnaround schedule.
- Delivering Integrated Turn Around schedule/ planning and contributing to the Production Efficiency Improvement (PEI) intiative.
- Planning and scheduling all major, minor and bulkwork task/activity.
- Monitor and provide feed back of Turn Around work packages alocation.
- Coordinate an optimized solutions in term of priority and schedule in case of there is conflicting requests from Operations or others.
- Acts as a coordinator for collation and submission of all neccesssary reports to Turn Around Manager and above.
- Propose the Turn Around Projects forecast.
- Identify and monitor the agreed schedule & cost reduction initiatives.
- Monitor budget expenditure to achieve maximum value of perfomance delivery.
- Where appropriate provide coaching and advice on the planning, scheduling, preparation and execution of Turn Around Integrated Team for Operation or other related teams.
Rotating Equipment Engineer
Requirements:
- Ensure that equipment safe design limit are implemented and in line with the requirements of recognized industry standards to deliver facilities technical integrity.
- Ensure any gaps/non compliance are identified, discussed and agreed with Rotating Engineer Technical Authority.
- Ensure that the Performance and Mechanical Integrity of all Rotating equipments are within the Technical design Margin, and any deviation that impact the production guarantee shall be carefully reviewed and agreed by Technical Authority.
- Ensure of any Rotating Equipment Operation, Monitoring and Trouble shooting.
- Review, any non conformance proposal and/or equipment delivered/installed and to provide an alternate solution which is consistent with the Project and operation requirement.
- Ensure that the appropriate standards, practices and operation guidelines are followed.
- Technically evaluate request for operation exceptions to the design.
Spares Analyst
Requirements:
- Work with Maintenance Engineer and Planners to identify parts required to support planned and unplanned maintenance.
- Assist with item purchase specifications so as correctly manufactured and certified items are delivered to the plant.
- Support all maintenance disciplines and sometimes other departments with identifying parts requirements and stock.
- Work with the Maintenance and Materials Departments to set stock levels for non-tag related bulk maintenance and consumable type supplies and materials.
- Interface with equipment vendors to acquire additional information, when required.
Maintenance Engineer
Requirements:
- Perform Maintenance Build functions for new and revised equipment resulting from the MOC process.
- The designated Tangguh Power User of Maximo system who will work very close with Integrated Field Planning (IFP) team to train users.
- Develop and maintain all Maintenance Strategies & Planned Maintenance Routine documents.
- Optimize the Maximo program to maximize availability, efficiency, and reduce cost.
- Perform maintenance engineering functions such as bad-actor and high maintenance cost analyses using Bi-Cycle.
- Analyze data quality (e.g maintenance activities log keeping etc) through Maximo system and enforce high quality data.
Mechanical Engineer
Requirements:
- Ensure that mechanical equipments are operated in safe design limit and in line with the requirements of recognized industry standards to deliver facilities technical integrity.
- Ensure any gaps / non compliance are identified, discussed and agreed with Mechanical Technical Authority.
- Ensure that the Performance and Mechanical Integrity of all Mechanical equipments are within the Technical design Margin, and any deviation that impact the production guarantee shall be carefully reviewed and agreed by Mechanical Technical Authority.
- Review any non conformance proposal and/or equipment delivered/installed and provide an alternate solution which is consistent with the Project and operation requirement.
- Ensure that the appropriate standards, technical practices and operation guidelines are followed.
- Technically evaluate request for operation exceptions to the design.
Project Modification Leader
Requirements:
- Manage the staff and contractor to deliver project that meets KPI on HSE, Quality, Integrity and the Triple Constraint of Project Management: Scope, Cost, and Schedule.
- Accountable to deliver Project Execution Plan, Contracting Strategy, Risk Management Plan, Project Control Plan, Change Management Procedure, Project Report for stakeholders.
- Accountable for coaching and development of team member.
- Accountable for compliance to Project principles.
Process Team Leader
Requirements:
- Minimum Bachelor degree, preferably in Chemical Engineering.
- Minimum 10 years of relevant experience, 5 of which in a Supervisory position.
- A good command of both oral and written English is essential.
- Willing to work in remote area.
- Detailed knowledge of process plant equipment and associated systems for a large processing facility
- Familiar with any Computerized Maintenance Management System (CMMS).
- Familiar with MAXIMO system would be advantage
Storage & Loading Team Leader
Requirements:
- Oversee and direct the activities related to the Offshore Tangguh Gas Production Facilities (GPF), Pipeline, the Onshore Receiving Facilities (ORF), and the Storage & Loading (S&L) areas to ensure the continued production and gas delivery to the onshore LNG facilities.
- Ensure LNG production and shipping targets are met safely and reliably.
- Ensure that all facilities and related equipment are functioning properly and all activities in those areas are carried out professionally and efficiently.
Integrated Field Planning (IFP) Maintenance Scheduler
Requirements:
- Lead implementation of scheduled IFP Scheduling meetings while participating in valuation and prioritization process.
- Prepare detail maintenance schedule required to meet business objectives concerning completion of maintenance programs, covering Preventive Maintenance, Corrective Maintenance, and Turnaround.
- Define the optimum time (exact date) to execute a set of planned activities and designate the exact resources to perform the work.
- Responsible in developing and maintaining master Turn Around schedule.
- Supervise maintenance scheduling activities by contractor maintenance planners through leading and coaching ten (10) contractor planners (5 back-to-back positions).
- Analyze potential problem, propose mitigation plan and potential improvement, and communicate to all relevant stake holders.
Integrated Field Planning (IFP) Maintenance Planner
Requirements:
- Lead implementation of scheduled Integrated Field Planning (IFP) planning meetings while participating in valuation and prioritization process.
- Prepare detail maintenance activities required to meet business objectives concerning completion of maintenance programs, such as Preventive Maintenance, Corrective Maintenance, and Turnaround.
- Define type, sequence and duration of activities, as well as identify and take initiative to expedite necessary resources (material & labors) and skills required to perform the work.
- Supervise maintenance planning activities, by contractor maintenance planners through leading and coaching ten (10) contractor planners (5 back-to-back positions).
- Analyze potential problem, propose mitigation plan and potential improvement, and communicate to all relevant stake holders.
Electrical Engineer
Requirements:
- Assist the Electrical Technical Authority to supply technical assistance regarding all matters relating to electrical works.
- Ensure that any changes to electrical documentation, as a result of MOC work are captured and correctly recorded.
- Technical review of all electrical engineering package either modification or new facility for compliance with project specification and applicable International standard and confirm all Hazardous area certification is correct.
- Involve in day to day plant operation activities supporting to Maintenance and Operation to supply technical assistance providing necessary document.
All of the roles above are Papua site based positions on a 28-day rotation work pattern. There may be a requirement to spend periods in the Jakarta office.
Applications close: June 13, 2009
BP is an equal opportunity employer
Advertisements
