Hi guest ,  welcome to JOBSCDC.com  |  
Advertisements

PT Surveyor Indonesia (Persero) - SMK, D3, S1 Inspector PTSI December 2018

Written By JobsCDC on 4.12.18 | 10:11 AM

Advertisements


PT Surveyor Indonesia (Persero)
PT Surveyor Indonesia (Persero) / ptsi.co.id
PT Surveyor Indonesia (Persero) - PTSI is a leading state-owned company in Indonesia, based in Jakarta and running business in independent assurance services. PTSI engaged in Surveying, Verification, Inspection, Certification and Consultancy. PTSI has its business activities focused in 2 business process: Business Process related to Operations and Business Process related to Corporate Policy Establishment. As a state-owned company, PT Surveyor Indonesia (Persero) is majority owned by the Government of Indonesia. At present, the Government of Indonesia holds 85.12% shares in PTSI. Other remaining shares in PTSI was owned by Societe Generale de Surveillance SA (10.40%), and PT SUCOFINDO (Persero) (4.48%). At present, PTSI conducted business operations in all parts of Indonesia under the management of 11 domestic branch offices, 1 Singapore overseas branch offices, 3 UWK offices, 3 representative offices and directly employs 1,581 employees. PT Surveyor Indonesia (Persero) also supported by 2 key subsidiary companies, namely PT Surveyor Carbon Consulting International (99.00%) and PT Synerga Tata International (60.00%).

According to information found in PT Surveyor Indonesia (Persero) Annual Report 2016 as cited by JobsCDC.com, PTSI booked total revenue of Rp848.61 billion in 2016. This total revenue is 0.15% down as compared to the year 2015 amounted to Rp849.86 billion. In year 2016, PTSI recorded a net profit of Rp89.80 billion or 1.79% decrease from Rp91.44 billion in 2015.

In line with its continued expansion program, PT Surveyor Indonesia (Persero) invites potential candidates who meet the following requirements to fill the positions of

Coating Inspector

Requirements
  • Male or Female.
  • Bachelor Degree in Mechanical, Structural, Metallurgy Engineering or equivalent or Diploma Degree in Engineering or Vocational High School (STM).
  • Fully trained and have a minimum 10 year experience in Coating field of offshore and onshore facilities for oil and gas.
  • Have good understanding of applicable codes and standards such as ASTM A123/A 123M, ASTM D3359, ASTM D4417,NACE RP0178, NACE RP0188, NORSOK M-501-5, NS 476, SSPC  GUIDE 15, SSPC QP 5, ISO 8502-3, ISO 8503 and other codes and standards related to coating.
  • Fluent in English, both written and spoken.
  • Have brevet certification NACE Coating inspector (Level III or II) or other equivalent qualification recognize by client.
Civil Inspector

Requirements
  • Male or Female.
  • Bachelor Degree in Civil Engineer or equivalent or Diploma Degree in Engineering or Vocational High School (STM).
  • Fully trained and have a minimum 10 year experience in civil construction project.
  • Have good understanding of applicable codes and standards such as ACI 117/117R, ACI 301, 1CI 308R,ACI 318/318R, ACI 357R,ASTM 767, ASTM 775, ASTM A615, ASTM C31, ASTM C94, ASTM C150, ASTM C192 and other codes and standards related to material handling and inspection.
  • Fluent in English, both written and spoken.
Telecommunication Inspector

Requirements
  • Male or Female.
  • Qualified engineering university graduates, minimum qualification a bachelor of science or Engineering Degree , electrical instrumentation or telecommunication background.
  • Have a minimum 10 year experience in cabling and fiber optic telecommunication system, facility security system, ship to shore link system, offshore safety communications and radar, radiation hazard assessment and control for telecommunication system.
  • Have good understanding of applicable codes and standards related to discipline.
  • Fluent in English, both written and spoken.
E & I Inspector

Requirements
  • Male or Female
  • Bachelor Degree in Electrical/Instrumental Engineering or equivalent or Diploma Degree in Engineering or Vocational High School (STM).
  • Fully trained and a minimum 10 year experience in inspection of electrical and instrumentation material and equipment test such as switch gear, motor control and other equipment used in offshore and onshore facilities for Oil and Gas
  • Have good understanding of applicable codes and standards such as IEC 60947-4-1, EIC 61850, IEEE 1613, NEMA ICS 2, API STD 1164, ISA 95.00.01, ISA 75.17, API RP 551, API RP 551, API STD 520 PT I, , API STD 521, API STD 598, API SPEC 6A, API STD 609, API STD 607, API MMPMS 14, ASME PTC 19.3, NEMA MG 1, NFPA 70, NFPA 72, NFPA 750, ISA 12.13.10, BSI BS EN 50082-2, ASME B1.20.1,and other codes and standard rules related to Electrical equipment and instrumentation.
  • Fluent in English, both written and spoken.
Rotating Equipment Inspector

Requirements
  • Male or Female.
  • Bachelor Degree (S1) in Mechanical, Structural, Metallurgy or Engineering equivalent or Diploma Degree in Vocational High School (STM).
  • Fully trained and a minimum 10 year experience in assembling or manufacturing inspection of rotating and other such as pump, compressors, gas turbine, packaged units, and other equipment used in offshore and onshore facilities for Oil and Gas
  • Have good understanding of applicable codes and standards such as API RP 500, API STD 616, API STD 617, API STD 670, API STD 671, ASME B16.5, ASME B16.1, AMT B15.1, ASME B31.3, ASME Section VIII Div. I and  and other codes and standard rules related to inspection of rotating equipment and unit packaged.
  • Fluent in English, both written and spoken.
Mechanical Inspector - Static Equipment

Requirements
  • Male or Female
  • Bachelor Degree in Mechanical, Structural, Metallurgy or Engineering equivalent or Diploma Degree in Engineering or Vocational High School (STM).
  • Fully trained and a minimum 10 year experience in welding inspection work, fabrication or pressure vessel and other fabrication work associated with and onshore and offshore facilities for Oil and Gas.
  • Advanced knowledge in rules and standard operation such as ASME B16.5, ASME B16.20, ASME B16.47, ASME 2235, ASME Section I, ASME Section IIA,ASME Section VIII Di. I and II, ASME Section V, NACE requirement   and other codes and standard rules related to fabrication of pressure vessel.
  • Fluent in English, both written and spoken.
  • Possess certification in ASME Authorized Inspector.
  • Possess certification in CSWIP 3.1/3.2 or AWS/CWI.
  • Possess certification in ASNT Level II(RT/UT/MT/PT).
Welding Inspector

Requirements
  • Male or Female.
  • Bachelor Degree in Mechanical, Structural, Metallurgy or Engineering equivalent or Diploma Degree in engineering or Vocational High School (STM).
  • Fully trained and a minimum 10 year experience as Welding Inspector work of structural fabrication, piping, process fabrication , static equipment fabrication and other fabrication work associated with onshore and offshore facilities for oil and gas.
  • Advanced knowledge in rules and standard operation such as AWS D1.1, ASTM, ASME Section IX, ASME Section V, ASME Section II, ASME B31.3, ASME B31.8, BS, API STD 650, IACS and other standard rules about  welding structure related.
  • Fluent in English, both written and spoken.
  • Possess brevet certification in CSWIP3.1/3.2 or AWS / CWI.
  • Possess certification in ASNT Level II (RT/UT/MT/PT) or PCN.
For further information, please refer official source from PT Surveyor Indonesia (Persero) on following link below. If you feel have the right talent and skills, please send your updated CV, transcripts, portfolio, application letter in jpg/pdf file to sdmsijak@gmail.com (maximum attachment file size of 10 mb). Please mention position tittle in your email subject. Closing date 10 December 2018. Application will be treated strictly confidential and only short-listed candidates will receive responses. (JobsCDC.com / Source)

Notes :
JobsCDC.com now available on android device. Download now on Google Play here. Please be aware of recruitment fraud. The entire stage of this selection process is free of charge. PT Surveyor Indonesia (Persero) - SMK, D3, S1 Inspector PTSI December 2018 will never ask for fees or upfront payments for any purposes during the recruitment process such as transportation and accommodation.
Advertisements

Related Jobs :


Share this article on :
 
Business Blogs My Zimbio Business Top Blogs